Five tips to choose the correct helmet

Posted by Ianna Dante on

When considering purchasing a new helmet, it's good to remember that one of the most delicate, yet often underappreciated, steps is choosing the size. While it is true that too tight a helmet feels unbearable, it is equally valid that too large won't fulfill its protective function. Helmets offer maximum protection only when the size is right. 

It is important, then, to not merely guess the size but to accurately measure the head and refer to the size chart provided by the manufacturer. Something else that needs to be considered is that heads have different shapes even when the circumference is the same. This is why it is essential to try a helmet on before buying it.  

Five quick steps to make sure that the size of your helmet is correct

  1.  Put the helmet on and fasten it, ensuring that the strap is not loose but not too tight; it must be close-fitting without being uncomfortable.
  1.  There should not be any gap between the head and padding when the helmet is on. The helmet must be snug around the entire head.
  1.  At the same time, you should not feel any pressure points, especially in the front area and on the nape of the neck. It is best to keep the helmet on for some minutes to ensure no uncomfortable contact points. 
  1.  Try tilting the helmet sideways and up and down. With a full-face helmet of the right size, the cheeks will remain in contact with the cheek pads when following their movement. If the helmet moves too much or even turns on the head, the size is wrong. 
  1.  The last test is retention. Tilt your head slightly forward with the helmet fastened on and apply light pressure at its rear bottom edge. The helmet must not slide forward.

Credit: The Dainese Journal


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.